GNEE (Tianjin) Multinational Trade Co., Ltd
+8615824687445
Contact Us
  • Telephone: +86-372-5055135

  • WhatsApp / WeChat:+8615824687445

  • Mobile: +8615824687445

  • Mail:es@gescosteel.com

  • Address: No.4-1114, Beichen Building, Beicang City, Beichen District, Tianjin, China

Concentric Reducers

Dec 22, 2022

Reducer, also known as big and small head, is one of the pipe fittings, used in the construction of fluid pipelines for the connection of two different pipe diameters, according to the different shapes can be divided into RC concentric reducer and eccentric reducer RE. Concentric reducer is a type of pipe fittings used for pipe diameter, generally the forming process is reduced diameter pressing, expansion pressing or diameter reduction plus diameter expansion pressing, and some small reducing pipe specifications They can also be stamped forming. Application of concentric reducer: When the flow rate of the fluid in the pipeline changes, such as increasing or decreasing, and the flow requirements do not change much, the reducer should be used; At the pump inlet, to avoid cavitation, a reducing tube is required; At the junction with the instrument, such as flow meter and regulating valve, in order to cooperate with the junction of the instrument, it is also necessary to use a reducer. At present, most pipeline networks need to use reducing heads, mainly used in petroleum, chemicals, natural gas, steam pipeline networks, hydraulic machinery, etc.

Reductores concéntricos

Concentric reducers can be divided into carbon steel according to the production material: (20#, A3, Q235, Q235A, Q235B, 20G, 16Mn, Q345, Q345R, ASTM A234WPB, ASTM A105, etc.) ; Stainless steel: (304, 304L, 316, 316L, S30408, S30403, S31608, S31603, SUS304, ASTM A403, TP321, TP317L, 347, 0Cr18Ni9, 00Cr19Ni10, , 1Cr18Ni9Ti, 06Cr17Ni12Mo2 , 022Cr17Ni12Mo2, etc.);

Common application standards for concentric reducers:

National standards: GB/T12459-2017, GB/T13401-2017

American Standard: ASME B16.9

Petrochemical standards: SH/T3408-2012, SH/T3409-1996