Alloy steels include a wide variety of iron-based materials. The nickel content varies from very low, ~0.3% in some alloy steels, to 20% in martensitic steels. Each alloy is designed to obtain a combination of greater strength, hardness, wear resistance or toughness than carbon steels. They are often used in equipment that supplies power, forms and cuts metal, or is used at low temperatures when carbon steels lack adequate toughness. For simplicity, alloy steels can be divided into several types, with specific properties for particular end uses. Nickel alloy steels are essential in the construction of tools and machinery that allow industry to manufacture other tools and machinery.

Typical chemical composition of some notable nickel-containing alloy steels
Steel type | Grade (UNS) | c | Neither | Cr | Faith | Others | Applications |
Hardenable low alloy | AISI 4340 | 0.4 | 1.8 | 0.8 | Bal | mo | Aircraft transmission gears, axles and landing gears |
AISI 4320H | 0.2 | 1.8 | 0.5 | Bal | mo | Surface-hardened gears and pinions to resist wear, but with a tough core | |
AR450 | 0.26 | 0.70 | 1.0 | Bal | mo | Abrasion resistant plate for hoppers, landfill liners, grates, ballistic plates | |
Tool steel - Air hardened | A9 (T30109) | 0.5 | 1.5 | 5.0 | Bal | Mo, V. | Drawing and forming dies, shear blades |
Tool steel - plastic mold | P6 (T51606) | 0.1 | 3.5 | 1.5 | Bal | Zinc die casting and plastic injection dies | |
High resistance low alloy (HSLA) "weathering steel from the elements". | A588 GR C | 0.1 | 0.35 | 0.5 | Bal | Cr, Cu, V | They provide a higher strength-to-weight ratio than plain carbon steel and greater resistance to atmospheric corrosion for use in bridge construction |
Nickel steel | 9% Nickel steel (K81340) | 0.13 | 9.0 | - | Bal | Cryogenic applications such as LNG storage | |
Martensitic steel | Maraging 300 (K93120) | 0.03 | 18.5 | - | Bal | Co, Mo, Al, Ti | Rocket engine casings, fuselages, power axles, aircraft landing gears, injection molds, dies |







