What is the correct material category in ASTM A123/A123M to specify pipes used for structural purposes?
This is a common question among specifiers, and the confusion is understandable considering that it appears that pipe can fall into two categories in ASTM A123/A123M Structural Shapes and Plate or Pipe and Tubing. This distinction is important because some steel thickness ranges for the two categories require different minimum coating thicknesses. See bold line in Table 1 of ASTM A123/A123M.


ASTM A123 Table 1: Minimum Average Coating Thickness (μm) by Material Category
| Material category | All samples tested - Steel thickness range (measured), in. (mm) | |||||
|---|---|---|---|---|---|---|
<1/16 [<1.6] | >1/16 to<1/8 [>1.6 to<3.2] | >1/8 to 3/16 [>3.2 to < .8] | >3/16 to<1/4 [>4.8 to<6.4] | >1/4 to<5/8 [>6.4 to<16.0] | >5/8 [>16.0] | |
| Structural forms | 45 | 65 | 75 | 75 | 100 | 100 |
| Strip and Bar | 45 | 65 | 75 | 75 | 75 | 100 |
| Plate | 45 | 65 | 75 | 75 | 75 | 100 |
| Tubes and pipes | 45 | 45 | 75 | 75 | 75 | 75 |
| Wire | 35 | 50 | 60 | 65 | 80 | 80 |
| reinforcing bar | - | - | - | - | 100 | 100 |
The correct material category to specify pipes used for structural purposes is Tubes and Pipes, as although they serve a structural function, they are still pipe products.
The minimum coating thicknesses in the ASTM galvanizing specifications are not selected at random, but come from experience galvanizing many different steel items and observing the common coating thicknesses achieved on those items. The different ASTM A123/A123M material categories typically have different steel chemistry than other material categories.
One of these differences is that tubes and pipes are often aluminum-killed rather than silicon-killed, so there is much less or almost no silicon in the tubes and pipes. Since silicon is one of the catalysts for the galvanizing reaction, tubes and pipes typically develop a thinner hot-dip galvanized coating because less is available to catalyze the metallurgical reaction in the galvanizing process.







