Bimetallic finned tubes are cold rolled composites formed by base tubes (such as steel tubes, copper tubes) and aluminum tubes in a finned tube machine, also known as steel (copper) aluminum finned tubes or laminated tubes. It overcomes the shortcomings that aluminum and other metals cannot be welded, and uses the pressure resistance of the base pipe and the efficient heat transfer and plasticity of aluminum to highlight the characteristics of the two materials in the process. It has advantages that are incomparable with other types of finned tubes.
Light weight: The specific gravity of aluminum is the smallest of the commonly used non-ferrous metals and ferrous metals, and the fin material of light metals determines that the heat exchanger made of it has the characteristics of light weight.
High heat transfer performance: The thermal conductivity of aluminum is about 211.9W/m?K, which is lower cost and more cost-effective than silver and copper. Objects with good thermal conductivity tend to absorb heat quickly and dissipate heat quickly.

Low air resistance: The surface of the fin is smooth and wrinkled after processing the finned bimetallic tube. Air can easily penetrate from within the space between fins.
Low contact thermal resistance: Practice has shown that the contact thermal resistance of finned bimetallic tubes is almost zero in the working environment below 210 degrees. Low contact thermal resistance is the performance guarantee of efficient heat transfer.
Large heat dissipation area: The finning ratio of bimetallic finned tubes can reach up to 22.7. The heat dissipation area of the unit is much larger than that of conventional winding heat pipes.
Long service life: During the processing of bimetallic finned tubes, the base tube and aluminum fins are firmly combined into one. And form a coating layer of 0.5mm thickness on the surface of the base pipe to protect the base pipe from contact with external ambient air, which can improve the service life.
Bimetallic finned tubes also have not easy dusting and non-fouling. It is easy to clean and remove surface water, has good resistance to temperature changes, and can maintain good heat transfer performance for a long time.





