GNEE (Tianjin) Multinational Trade Co., Ltd
+8615824687445
Contact Us
  • Telephone: +86-372-5055135

  • WhatsApp / WeChat:+8615824687445

  • Mobile: +8615824687445

  • Mail:es@gescosteel.com

  • Address: No.4-1114, Beichen Building, Beicang City, Beichen District, Tianjin, China

The way to solve the oxygen corrosion of finned tubes can be considered from the following aspects:

Feb 13, 2023

However, China's current management level, technical level and financial capacity cannot meet and adapt to those advanced deoxygenation and softening technology requirements. Therefore, the oxygen content in the heating water greatly exceeds the standard, resulting in corrosion of the finned tube. Therefore, how to solve the corrosion problem of finned tube under the condition of oxygenated medium is of great importance in China.
According to the current situation, the way to solve the oxygen corrosion of finned tube can be considered from the following aspects:
(1) The design of the heating system should try to avoid communication between the system and the large oxygen, that is, it should be closed as much as possible, such as the position of the exhaust stopcock, the closure of the fuel pump. circulation, etc., and at the same time avoid low pressure during the operation of the equipment. This also prevents unnecessary water loss.
(2) Supplemental water must be deoxygenated.
La forma de resolver la corrosión por oxígeno de los tubos con aletas se puede considerar a partir de los siguientes aspectos:

(3) Heating water plus corrosion inhibitor.
(4) When heating is stopped, the finned tube is filled with dry or deoxygenated water for maintenance.
(5) When the fin tube is newly installed for pressure test, the water pressure test medium should be added with aqueous solvent non-toxic rust inhibitor.