Structural steel is an important construction material characterized by its shape and cross section, as well as its mechanical and chemical qualities. Structural steel includes
Angles
Beams
Channels
Leg (flange) size: The measurement of each leg (see "A and B" in the diagram).
Leg (Flange) Thickness: The thickness of the leg ("C").
Other terms: Fillet radius: The curved part, where the interior transition between the web and the flange occurs, is called the fillet. The radius of the fillet is called the fillet radius (not always indicated)
Structural angle is a steel bar that has an L-shaped cross section. It is a piece of structural iron or steel in the shape of a 90 degree angle. It is ideal for all structural applications, general fabrication and repairs. This element can have legs (or flanges) of equal size; This is commonly known as an equal leg angle. Legs (or flanges) that are a different size are typically known as unequal leg angle.
The structural angle size measurement is commonly specified using the length of each leg (flange) and the thickness of the leg (flange). Dimensions in North America are usually in inches and in the UK in millimeters.
Terms of HSS rectangular and square tubes
Outside Dimensions: The outside measurement of each side (see "A and B" in the diagrams below).
Wall Thickness: The thickness of the tube wall ("C").
HSS Round Tube Terms
Outside Diameter: The measurement of the outside diameter of the tube (see "A" in the diagram below).
Wall Thickness: The thickness of the tube wall ("B").
Hollow structural steel (HSS) pipe has become an essential component of the construction industry. It is also widely used in the manufacturing of enclosures, automobiles and many other structural applications. HSS pipes are manufactured in three shapes: round, square and rectangular. They are available in a wide range of sizes and calibers. Some of the advantages of HSS pipes are
A high strength-to-weight ratio (less weight per foot)
uniform resistance
High resistance to torsional loading (excellent option for shoring)
Greater formability
Less resistance to air or water flow
Easier to fit the pieces together (no notches to be made)
Particularly suitable for compression column applications
HSS pipe is typically specified using measurements of the outside size and wall thickness of the pipe (example of square pipe: 2.000" x 2.000″ x 0. 250" wall / round tube example: 3.000" diameter x 0.250" wall).
Structural beams
Structural beams come in various shapes and sizes, so it is important to use the correct terminology when measuring.
Beam Depth: The distance from the top and bottom surface of the steel (see "A" on the diagram).
Wing Width: The width of the upper and lower flat horizontal sections ("B").
Wing Thickness: The thickness of the top and bottom flat horizontal sections ("C").
Web Thickness: Thickness of the vertical center section of a steel beam ("D").
Fillet radius: The curved part, where the interior transition between the web and the flange occurs, is called the fillet. The radius of the fillet is called the fillet radius (not always indicated).
Structural beams are also known as I-beams or H-beams, and W-beams for versions with wider flanges. Some construction companies call them universal beams or rolled steel beams (RSJ). They are typically used in building construction for structural support. The part of the structural beam that offers resistance to shear forces (break, tear or collapse) is the web, while the flanges resist the bending movement of the section.
In Canada and the United States, steel I-beams are typically specified using the depth (in inches) and weight of the beam (in pounds per foot). For example, a "4 x 13" I-beam has a depth of approximately 4 inches (the measurement taken from the outside face of the first flange, to the outside face of the opposite flange). This channel would weigh approximately 13 pounds per foot (note that wide flange beams can often vary from the factory listed depth measurement).
In Canada, some steel I-beams may be available in metric, and although the depth and weight of the beam are in metric terms, the way they are measured is very similar. An example would be a "W250x33" beam that is approximately 250 millimeters deep and weighs approximately 33 kg per meter.
In the United Kingdom, universal beams or columns are usually specified by a code consisting of the depth (the measurement taken from the outside face of the first flange, to the outside face of the opposite flange), the width of the flange and the kilograms per meter. The code can end with the type of section (for example, UB - universal beam or UC - universal column). All measurements are expressed in the metric system. Therefore, a 152x152x23UB would be a universal beam approximately 152 millimeters deep x 152 millimeters wide and weighing approximately 23 kilograms per meter.
Structural channel
Channel Terms
Channel Depth: The distance from the top and bottom surface of the steel (see "A" in the diagram).
Flange Height: The width of the top and bottom flat horizontal sections (flanges) ("B").
Web Thickness: The thickness of the vertical center section of a channel ("C").
Radius of the fillet: The curved part, where the internal transition between the web and the flange occurs, is called the fillet. The radius of the fillet is called the fillet radius (not always indicated).
Channel steel is a hot rolled product (typically ASTM A36 grade). If you look at the cross section, it has a vertical web with upper and lower horizontal flanges. It is available in a wide range of sizes and core thicknesses. The shape of this type of product provides great structural strength, making it an ideal product for the manufacture of frames and reinforcements. It is normally used in the manufacture of machinery, enclosures and vehicles. It is also used in building construction for structural support. Structural channel, also known as C channel, is distinguished from the I-beam, H-beam, or W-beam, which have flanges on both sides of the web.
In Canada and the United States, steel channels are commonly specified using the depth (in inches) and weight of the channel (in pounds per foot). For example, a "6 x 13" channel is approximately 6 inches deep and weighs approximately 13 pounds per foot.
In the UK, the steel channel (or C section) may also be called a parallel flanged channel. They are measured in a very similar way to universal beams: depth, flange width and kilograms per meter.
The only exception to the above method in measuring channels would be the U-channel or bar channel, which are measured by depth, then flange height, and finally web thickness. Dimensions in North America are usually expressed in inches and in the United Kingdom in millimeters.
The steel channel has the following categories:
Structural Channel - Used in various construction and manufacturing projects.
Boat and Automobile Channel - A set of sizes that were developed for use in boat and automobile construction.
Stair Tread Channel - A set of sizes that were developed for use in the construction of stair casings.
U-Channel or Bar Channel - A set of smaller channel sizes (Depth - 0,750" minimum to 2,500" maximum).
Disclaimer: Please note that this information should not be used for design purposes, and under no circumstances will MSFFC be liable for any damages resulting from misuse of this information.








