GNEE (Tianjin) Multinational Trade Co., Ltd
+8615824687445
Contact Us
  • Telephone: +86-372-5055135

  • WhatsApp / WeChat:+8615824687445

  • Mobile: +8615824687445

  • Mail:es@gescosteel.com

  • Address: No.4-1114, Beichen Building, Beicang City, Beichen District, Tianjin, China

What is the difference between the head and the cap?

Dec 29, 2022

The use of pipe cap is the same as that of cap, but the pipe head generally refers to the GB/25198 - 2010 standard, while in the national standard of welded pipe fittings GB/t{ {1}}, there is no mention of pipe head in a word, only the word pipe cap appears, Not only in GB/t12459 - 2017, but also in GB/t13401 - 2017. A word that does not mention the closure head means that in the steel butt-welded seamless pipe fittings standard it is called pipe cap. The specifications are not large, the largest outer diameter GB/t12459 - 2017 Φ 813 and Φ Of the specification 820. That is, the largest of the GB/t13401 - 2017 standards with larger specifications is Φ The 1220 product is ready. If you want to find a larger cover, you should refer to the GB/t25198 - 2010 standard book, which can be seen in it. Φ 6000, that is, the product with diameter dn6000. The data of various heads in the standard is also very clear. For example, the elliptical head code name ehb refers to the inner diameter, the code name eha refers to the outer diameter, or the spherical head, disc head, spherical crown head, conical shell head and the flat bottom head are written in very detail.
Pipe cap, also known as cap, cap, etc., is a fitting welded to the end of the pipe or installed on the outer thread of the pipe end to cover the pipe and close the pipe. The official hat caliber is generally less than dn300, which is mainly used in the pipeline, which is connected with the pipeline or strengthened as a locking plate, and is not used as the main pressure component . Common tube cap materials are: carbon steel: (20, a3, q235a, q235b, 20g, 16min, ASTM a234wpb, ASTM a105, etc.); Stainless steel: (304, 304l, 316, 316l, s30408, s30403, s31608, s31603, sus304, ASTM a403, tp321, 0cr18ni9, 00cr19ni10, 00cr17ni14mo2, 1cr18ni9ti, 0 6cr17ni12mo2, 022cr17ni12mo2, etc. .) tube cap diameter: DN15 - DN800 wall thickness: sch10 - sch160 standard: asmeb16.9, GB/t12459 - 2017, etc.

¿ cuál es la diferencia entre la cabeza y la tapa?
The head is the end cap of the pressure vessel and is a main pressure component of the pressure vessel. The paper is the seal. One is to make the top and bottom of the pressure vessel into a tank shape, and the other is that the pipe is at the top and bottom, and it is not ready to extend forward, so seal the pipe into a tank shape. welding with a closing head. According to different geometric shapes, it can be divided into spherical shape, oval shape, disc shape, spherical crown shape, conical shell and flat cap, among which spherical, oval, disk shaped and spherical crown shape heads are also collectively called convex heads. It is used in various container equipment, such as storage tanks, heat exchangers, towers, reactors, boilers and separation equipment.
Head implementation standard: GB/25198 - 2010
The common name of the head, the code name of the type is as follows:
1. Hemisphere-shaped head: Type code: hha;
2. oval head: 1) type code name: eha; 2) Type code: ehb;
3. disk head: 1) type codename: tha; 2) type codename: thb;
4. Crown-shaped head: Type code: sdh;
5. Flat bottom shaped head: Type code: fha;
6. Conical head: 1) Type code: Cha (30); 2) Type code: Cha (45); 3) Type code: Cha (60)
Summary of the difference between the cap and the cap: The cap and the official cap look extremely similar, and the difference between the two mainly lies in the size of the inner diameter and the scope of use. Previously, it was also said that the pipe hat is just a pipe plug, which often does not exceed dn300. If the size is larger, the seal must be used. Butt weld seal theory can be infinitely large. The equipment limit is generally about DN6000.