In order to prolong the life of the fin tube the following are the most critical
1, it should be periodically checked for deposits, coking, water oxide layer and other scale adhering, and cleaned in time. At the same time, we must pay attention to the flow rate of the flushing liquid should not be too fast to avoid affecting the heat dissipation effect of the fin radiator.
2,Check whether the contact port of the fin tube is loose and whether the corner pad is off, and do not get too close to the ground to prevent watering the plants inside from corroding the fin tube.
3,Check whether the joint of each finned tube and the rubber gasket is accurate and whether the rubber gasket itself is complete, to avoid leakage caused by degumming and destruction of the rubber gasket.
4, each meter adjustment must be operated by one person, and in strict accordance with the operating procedures for operation and maintenance, each finned tube re-compression, pay attention to the scale of the last compression, not the rubber gasket pressure too much, so as to reduce the use of the seal life.
5,When replacing the rubber gasket of the finned tube, the entire section must be renewed to avoid uneven gaps in each piece, affecting the heat transfer results.
