GNEE (Tianjin) Multinational Trade Co., Ltd
+8615824687445
Contact Us
  • Telephone: +86-372-5055135

  • WhatsApp / WeChat:+8615824687445

  • Mobile: +8615824687445

  • Mail:es@gescosteel.com

  • Address: No.4-1114, Beichen Building, Beicang City, Beichen District, Tianjin, China

HOW TO CUT CARBON STEEL TUBE?

Feb 15, 2023

There are many ways to cut carbon steel pipe, such as oxyacetylene gas cutting, air plasma cutting, laiser cutting, wire cutting, etc., can cut carbon steel. There are four common cutting methods:
(1) Flame cutting method: This cutting method has the lowest operating cost, but consumes more fluid seamless tubes and poor core quality. Therefore, manual flame cutting is often used as a cutting method. auxiliary court. However, due to the improvement of
Flame cutting technology, some factories have adopted automatic cutting of multi-head flame cutting machine as the main method for cutting fluid carbon steel seamless pipes.
(2)My cutting method: This method has high production efficiency and low cutting cost. Medium carbon seamless pipes and low carbon alloy structural steel pipes are mainly cut by shearing. To improve the efficiency of shearing, a large tonnage cutting machine is used for double shearing; To reduce the degree of flattening of the end of the steel pipe during cutting, the cutting edge generally adopts a shaped blade. For seamless steel pipes that are prone to shear cracks, the steel pipes are preheated to 300 degree C for shearing.
(3) Fracture method: The equipment used is a fracturing press. The rupture process is to use a cutting torch to cut all the holes in the predetermined rupture liquid pipe, then put it into a rupture press and use a triangular ax to break it. The distance between the two points is 1-4 times the diameter Dp of the blank tube.
(4) Sawing method: This core method has the best cutting quality and is widely used in alloy steel pipes, high-pressure steel pipes and fluid seamless pipes, especially for cutting large diameter fluid seamless steel pipes. and high-alloy steel pipes. Sawing devices include bow saws, band saws and circular saws. Cold circular saws with sectoral high-speed steel blades are used for cold sawing of alloy steel pipes; Cold circular saws with carbide blades are used for high alloy steel saws.
Precautions for cutting carbon steel pipes:
(1)Galvanized steel pipes and carbon steel pipes with a nominal diameter less than or equal to 50mm are generally suitable for cutting with a pipe cutter;
(2) High-pressure pipes and pipes with a tendency to harden should be cut by mechanical methods such as saws and lathes. If using oxycatlene flame or ionic cutting, the affected area must be removed from the cutting surface, and its thickness is generally not less than 0.5mm;
(3)Stainless steel tubes must be cut by mechanical or plasma methods; other steel tubes can be cut with oxyacetylene flame.

¿CÓMO CORTAR TUBO DE ACERO AL CARBONO?
 


Related Products