The primary equivalents for material 1.4057 are AISI 431, UNS S43100, and the European designation X17CrNi16-2. Other equivalent standards include BS 431S29, JIS SUS431, and variou
AISI 431, 1.4057, and X17CrNi16-2 are all equivalent grades of the same martensitic stainless steel. Other common equivalents include UNS S43100, JIS SUS431, SAE 431, and AFNOR Z15
1.4028 stainless steel is a martensitic chromium steel with a composition of approximately 0.26-0.35% carbon, 12-14% chromium, up to 1.5% manganese, up to 1.0% silicon, and maximum
The main difference is that 420F is a free-machining version of 420 stainless steel, with added sulfur to improve its machinability, making it easier to cut, drill, and grind. 420
S42000 is a martensitic stainless steel grade, specifically AISI 420, known for its high hardness and strength, and moderate corrosion resistance. It is widely used for application
The main difference lies in the carbon content of 30Cr13 (approximately 0.3%), which is higher than that of 20Cr13 (approximately 0.2%). This results in significantly higher hardne
The main equivalents for 3Cr13 steel are 420 (USA), X30Cr13 (EU), and SUS420J2 (Japan). These grades are considered comparable due to similar composition and properties, though min
SUS329J1 is a chromium-nickel austenitic-ferrite duplex steel, known for its high strength and corrosion resistance, whereas the designation J3L is often a variant for welding cons
Material 1.4462 is equivalent to several other designations, including UNS S31803, UNS S32205, and ASTM A182 F51. It is a duplex stainless steel, often also referred to as X2CrNiMo
