304 stainless steel seamless tubes are processed from blank tubes. For protection, it is usually placed outdoors. Packed in woven bags, if they are high-demand steel tubes, put them inside. Pack them in woven bags, and then use the wooden box to adjust the structure. As for the size of the wooden box, the key to making the Steel Pipe is the protection of the factory. The stand should use a thick layer of leather to cover the circular economy, and then immediately check the expected temperature increase. After passing the test, the wooden box is loaded immediately, which can reduce a lot of scratches, because China rarely requires such a high level. 304 seamless pipe scratches are essential when loading and unloading, it is easy to scratch.
The 304 stainless steel seamless pipe is the key when loading and unloading. If scratches are found, they can be polished with sandblasting and packed. The 304 seamless tube is packaged in a box, so it is even brighter than the surface that has just been produced, but the cost will be higher. Stainless steel tends to be balanced. The key is the widespread loss of practicality and material. Seamless pipe quality 304. 304 seamless tube for surface. The 304 seamless pipe requirements are not very high. MI welding points and precautions 1. Use a flat feature welding power source. The 304 seamless pipe adopts reverse polarity when the DC current (the welding wire is connected to the positive electrode) 2. Pure argon gas (purity 99.99% or Ar + 2% O2) is generally used. Generally speaking, the flow rate is 20 x 25L / min.
